BDGMN - 3M BRAND SPRAY ADHESIVE 74
- MSDS: BDGMN
- Manufacturer: 3M CO (SUPPLIER:CHEMICAL COMMODITIES AGENCY)
- Product Name: 3M BRAND SPRAY ADHESIVE 74
- National Stock Number: 8040-00-181-7761
Product Identification
Product ID:3M BRAND SPRAY ADHESIVE 74
MSDS Date:01/01/1987
FSC:8040
NIIN:00-181-7761
MSDS Number: BDGMN
Responsible Party
ST. PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110
Cage: 76381
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 48%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOPARAFFIN HYDROCARBON
Fraction By Weight: 2%
ACGIH TLV: 4000PPM
PROPELLENT-PROPANE/ISOBUTANE
Fraction By Weight: 40%
THERMOPLASTIC TERPENE
RTECS: 9999999ZZ
,SILANE & DYE.
RTECS: 9999999ZZ
Hazards
Effects of Overexposure:MODERATELY IRRITATING TO EYE/SKIN;VAPOR
IRRITATING TO RESPIRATORY SYSTEM;INGEST:LIQ NON TOXIC ORALLY
First Aid
First Aid:USE STANDARD FIRST AIR PROCEDURES. CALL EMERGENCY MEDICAL
CARE.
Fire Fighting
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:TREAT AS PRESSURIZED CONTAINER.
Accidental Release
Spill Release Procedures:SUPPLIER DID NOT SPECIFY.
Handling
Handling and Storage Precautions:NONE
Exposure Controls
Respiratory Protection:NONE
Ventilation:NONE
Protective Gloves:NONE
Eye Protection:AS REQUIRED
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED 9-22-86. THE MATERIAL & MSDS ARE SUPPLIED BY CHEMICAL
COMMONDITIES(FSCM:60777),W/CONTRACT NO:OM/S-W-YV584-1,AND THE MSDS
LIST 3M CO AS THE MFG.
Chemical Properties
HCC:V3
Vapor Density:2.93
Spec Gravity:1
Evaporation Rate & Reference:0.8,ETHER=1.
Solubility in Water:NIL
Appearance and Odor:THIN LIQUID IN AEROSOL,LIGHT ORANGE COLOR.
Percent Volatiles by Volume:90
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:HCE VAPOR OR OTHER CHLORINATED
PRODUCT.
Disposal
Waste Disposal Methods:INCINERATE PROPERLY IN ACCORDANCE W/LOCAL
REGULATIONS AS THE PRODUCT CONTAINS HALOGEN,DO NOT PUNCTURE OR
INCINERATE IN HOUSEHOLD INCINERATOR.COMPLETLY EMPTY CONTAINERS MAY
BE DISPOSED OF IN A SANITARY LANDFILL BY LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.